Auger Digger Auger Post Hole Gas Powered Earth Fence Ground +Drill Set 52CC/71CC

Description

52CC/71CC Auger Post Hole Gas Powered Earth Auger Digger Fence Ground Drill Kit Type1:71 cc Engine The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts, poles, trees, shrubs etc. Equipped with a 71cc gasoline engine, the auger can be handled by one or two people easily for a wide variety of tasks. Ergonomically designed, it is accurate, easy to use and economical. With this tool, you will be able to perform professional quality work. The Earth Auger has a straight through gearbox, unlike models with a side mounted engine, the straight through design is much more robust and less likely to shear gears. Technical Details: Engine: Single Cylinder, 2-stroke, air-cooled Cylinder capacity : 71cc Fuel mix: 25/1 Bit length : 31"
Auger Digger Auger Post Hole Gas Powered Earth Fence Ground +Drill Set 52CC/71CC
Description
52CC/71CC Auger Post Hole Gas Powered Earth Auger Digger Fence Ground Drill Kit
The attached manual is a general version of a variety of products, so the accessories and parameters introduced will be slightly different. The product you received is complete and correct. If you have any questions about installation/operation, please contact the seller for assistance.
Type1:71 cc Engine
The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts, poles, trees, shrubs etc.
Equipped with a 71cc gasoline engine, the auger can be handled by one or two people easily for a wide variety of tasks.
Ergonomically designed, it is accurate, easy to use and economical.
With this tool, you will be able to perform professional quality work.
The Earth Auger has a straight through gearbox, unlike models with a side mounted engine, the straight through design is much more robust and less likely to shear gears.
Technical Details:
Engine: Single Cylinder, 2-stroke, air-cooled
Cylinder capacity : 71cc
Fuel mix: 25/1
Bit length : 31"
Safety: Bit Lock
Power：3.2kw
Carburetor with pump
Easy starting system (cord starter). Centrifugal clutch
Change bits quickly and easily
Weight : 10.85 Kg. (without bit)
Accessories:
Fuel Mixing Bottle
Toolkit for assembly
Type2:52 cc Engine
:
52CC Gas Earth Auger Post Hole Digger Garden Holing Fence Post Digging Machine
Note: When using the hand puller, it needs to be buffered. Do not pull it all at once, just pull it to two thirds. Be sure to mix gasoline and two-stroke engine oil before adding it. The ratio is gasoline: two-stroke engine oil = 25:1
Please keep the choke to on position when the machine is in use!
The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts, poles, trees, shrubs etc.
Equipped with a 52cc gasoline engine, the auger can be handled by one or two people easily for a wide variety of tasks.
Ergonomically designed, it is accurate, easy to use and economical.
With this tool, you will be able to perform professional quality work.
The Earth Auger has a straight through gearbox, unlike models with a side mounted engine, the straight through design is much more robust and less likely to shear gears.
Technical details:
Engine: Single Cylinder, 2-stroke, air-cooled.
Cylinder capacity : 52cc.
Fuel mix: 25/1.
Safety: Bit Lock.
Power: 1.9KW/7500rpm
Carburetor with pump.
Easy starting system (cord starter). Centrifugal clutch.
Change bits quickly and easily.
Weight : 10.35 Kg. (without bit).
Rotational Speed：8500RPM
horsepower: 2.4 ps
Accessories:
Fuel Mixing Bottle.
Toolkit for assembly.
Type3:4'' 6'' 8'' Drill Bits only
3 bits: 4", 6" and 8".
Extension Bar: 12".
Supplied with bits of 4", 6" & 8", the auger can drill holes of various diameters.
Type4:71 cc Engine + 4'' 6'' 8'' Drill Bits
Accessories:
3 bits: 4", 6" and 8".
Extension Bar: 12".
Fuel Mixing Bottle.
Toolkit for assembly.
Type5: 52 cc Engine + 4'' 6'' 8'' Drill Bits
Note: When using the hand puller, it needs to be buffered. Do not pull it all at once, just pull it to two thirds. Be sure to mix gasoline and two-stroke engine oil before adding it. The ratio is gasoline: two-stroke engine oil = 25:1
Start steps:
1. Please remember to close the air door and then pull the starter (don’t forget this step, otherwise you will not be able to ignite when you dead lift)
2. Pull the rope starter 3-5 times, the total length of the rope is 70cm, and the safety distance is 30-50cm. If the safety distance is exceeded, the rope will be broken, not the longer the rope is, the better
3. After the start is successful, remember to open the damper (not to pull the starter when opening the damper. When the damper is opened, too much air enters and there is too little oxygen, it is difficult to start, so pull the starter when the damper is closed.After the machine starts successfully, open the damper.
Pulling the starter to the end of 70cm will break the rope; the safety distance is 30-50cm, and pulling the rope hard will cause the rope to break. After breaking, you need to buy the starter again.
Please keep the choke to on position when the machine is in use!
The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts, poles, trees, shrubs etc.
Equipped with a 52cc gasoline engine, the auger can be handled by one or two people easily for a wide variety of tasks.
Ergonomically designed, it is accurate, easy to use and economical.
Supplied with bits of 4", 6" & 8", the auger can drill holes of various diameters.
With this tool, you will be able to perform professional quality work.
The Earth Auger has a straight through gearbox, unlike models with a side mounted engine, the straight through design is much more robust and less
likely to shear gears.
Technical details:
Engine: Single Cylinder, 2-stroke, air-cooled.
Cylinder capacity : 52cc.
Fuel mix: 25/1.
Bits : 4", 6" and 8".
Bit length: 31".
Safety: Bit Lock.
Power: 1.9KW/7500rpm
Carburetor with pump.
Easy starting system (cord starter). Centrifugal clutch.
Change bits quickly and easily.
Weight : 10.35 Kg. (without bit).
horsepower: 2.4 ps
Accessories:
3 bits: 4", 6" and 8".
Extension Bar: 12".
Fuel Mixing Bottle.
Toolkit for assembly.
Type6:(2.3HP)52 cc Engine + 3xDrill Bits
Description:
The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts,
poles, trees, shrubs etc.
Equipped with a 52cc gasoline engine, the auger can be handled by one or two people easily for
a wide variety of tasks.
Ergonomically designed, it is accurate, easy to use and economical.
Supplied with bits of 4", 6" & 8", the auger can drill holes of various diameters.
With this tool, you will be able to perform professional quality work.
The Earth Auger has a straight through gearbox, unlike models with a side mounted engine,
the straight through design is much more robust and less likely to shear gears.
Technical details:
Engine: Single Cylinder, 2-stroke, air-cooled.
Cylinder capacity : 52cc.
Fuel mix: 25/1.
Bits : 4", 6" and 8".
Safety: Bit Lock.
Power：1.7W/8500rpm
Carburetor with pump.
Easy starting system (cord starter). Centrifugal clutch.
Change bits quickly and easily.
Weight : 11.6 Kg. (without bit).
Accessories:
3 bits: 4", 6" and 8".
Extension Bar: 12".
Fuel Mixing Bottle.
Tool kit for assembly.
note
Without Bits
Features
❤❤❤Quality Assurance+ 100% After-Sales Service
Shipping notice
Can not ship to Puerto Rico,Alaska/Hawaii
Brand
Unbranded
MPN
Does Not Apply
Fuel mix
25/1.
Bits
4", 6" and 8".
Bit length
31".
Model
Does not apply
Power Source
Gasoline
Engine Type
2-Stroke
Assembly Required
Yes
Voltage
Gasoline Powered
Fits Hitch Category
1
Compatible Equipment Type
/
Compatible Equipment Make
Universal
Hook Up
Drawbar
Custom Bundle
Yes
Bundle Description
Optional
Modified Item
No
Modification Description
/
California Prop 65 Warning
/
Country/Region of Manufacture
China
On Jul 5, 2022 at 20:13:34 PDT, seller added the following information: